Table of Contents
- 1 How do I reset my magicJack?
- 2 Is magicJack server down?
- 3 Why my MagicJack is not working?
- 4 How do I fix error 1 on MagicJack?
- 5 Why is my MagicJack plus not working?
- 6 Does magicJack work without Internet?
- 7 What to do if magicJack wont start on your computer?
- 8 Why does my cell phone not work with magicJack?
How do I reset my magicJack?
How to Reset the Magic Jack
- Unplug the Magic Jack device from the USB port or USB hub to your computer. Video of the Day.
- Shut down the Magic Jack software in your computer.
- Plug the Magic Jack device back into the USB port or USB hub which is connected to your computer.
- Restart the Magic Jack software on your computer.
Is magicJack server down?
Magicjack.com is UP and reachable by us.
How do I update my magicJack Plus firmware?
- Download the new firmware updater here.
- Plug the magicJack device into Mac computer (do not unplug until Step 5)
- Double-click the firmware file you just downloaded “mjisoupdate.dmg”
- Terminal will indicate the upgrade process has started, the upgrade process should take less than one minute.
How do you reset magicJack plus?
Unplug your magicJack, wait 15 seconds, and plug it back in. Go to My Computer and locate the magicJack drive, right click that drive then click format and click start. Unplug magicJack, wait 15 seconds, and plug magicJack back in.
Why my MagicJack is not working?
If your magicJack device is connected to a router: Reboot or restart your router. Make sure the phone and network cables are securely connected by unplugging and plugging the cables back until you hear or feel the connector lock in place. Use a different ethernet or network port on the router.
How do I fix error 1 on MagicJack?
Unplug your modem/router from the electrical outlet for approximately 1 minute and then plug it back in. Plug your modem/router back in and wait approximately 2-3 minutes before plugging anything else back in. Plug your magicJack device back into the modem/router, telephone.
Why is my magicJack not working?
Can I connect magicJack to my router?
Internet Router. Insert the MagicJack Plus device into the USB port on the device’s power adapter. Use an ethernet cable (RJ45) to connect the MagicJack Plus to your Internet router. The ethernet cable must be plugged into the port labeled “Internet.”
Why is my MagicJack plus not working?
Unplug MagicJack, wait a few moments and plug it back in. Try using a different USB port if your computer does not display a message that it has found new hardware. When you unplug MagicJack, you can turn off the software and allow it to re-load once you plug it back in, which may fix any problems.
Does magicJack work without Internet?
magicJack cannot be used without an internet connection. The analog version of magicJack needed both a computer and an internet connection to receive and make calls. Upgrades to magicJack have made it possible for users to use magicJack without computers but will still need internet to communicate via calls.
Does old magicJack still work?
No permanent changes are made. To summarize, for $20 plus the cost of a MagicJack, you can enjoy unlimited phone service at least through the end of the year. The only real downside is that, as with the original MJ itself, you need to leave a PC running 24-7.
What is Error 23 on MagicJack?
MagicJack Error Code 23 pops up Closed ports: The firewall security of your router has been connected with a method like ports that are not being opened due to which an issue takes place.
What to do if magicJack wont start on your computer?
Go to My Computer and locate the magicJack drive, right click that drive then click format and click start. Unplug magicJack, wait 15 seconds, and plug magicJack back in. You will need to download the magicJack upgrade again. Why won’t magicJack start on my work computer?
Why does my cell phone not work with magicJack?
Your phone may be incompatible with the magicJack. It may be a very old AT corded phone with real bells, jerry-rigged to work with RJ-11 jacks. Apparently some Uniden phones are also incompatible.
What should I do if my magicJack cable is worn out?
Make sure the phone and network cables are securely connected by unplugging and plugging the cables back until you hear or feel the connector lock in place. Use a different ethernet or network port on the router. Cords and cables can get worn out or damaged without any visible signs. Connect a different phone cord or ethernet cable.
Is the magicJack Plus compatible with my phone?
Your phone may be incompatible with the magicJack. It may be a very old AT corded phone with real bells, jerry-rigged to work with RJ-11 jacks. Apparently some Uniden phones are also incompatible. Try Panasonic. In any case, try a different corded or cordless phone. The TalkFree app by magicJack may be incompatible with your android phone.